E. Emerson Tool T-50 All in One Clamp 50-Inch Double Grip Bench Clamp with T-track
 Regular Price: |
Product Details
|
| Not what you're looking for? Try smart custom search: |
Customer Review
Excelent easy to use tool - Recommended.
I bought the T-50 50" Double Grip Bench Clamp with T-track for a large acrylic project. Cell cast acrylic sheets, 1/2 and 3/8" thickness, were cut with the T-50 as a guide for my circular saw. The T-50 is light for its size, is easy to allign and clamps well - lots of force and without losing my allignment. It held the acrylic well while the cuts were made - even 48" cuts while clamped on smooth acrylic edges. I was able to hold very close tolerances on all cuts, exceeding my expectations.I have also used the T-50 on additional projects - including particle wood and plywood - usually as a router or saw guide. It has performed well on all occasions.
Top to learn more
Clamp
Great piece to add to your collection. It holds really well and is a great help in ripping plywood panels.
Top to learn more
Product Description
Twin Clamps are designed specifically for assembly projects. The twin has two clamps built into one aluminum straight edge. One clamp faces down to hold your work table, the other clamp faces up to hold your project. The Twin, especially when used in pairs, simplifies gluing up drawer assembly and work holding for planing or sanding MODEL Top to learn more
The All in One Clamp T-50 50-Inch Double Grip Bench Clamp with T-track is a versatile bench clamp that also serves as fence and power tool guide. This clamp helps provide smooth, accurate sawing and routing on a variety of projects, and is completely adjustable for use with both drill presses or bandsaws. The T-track profile matches on all the clamps so guide plates and stops will fit on all your clamps, and it makes it easy to use accessories. This 50-inch clamp is has a 3/4-inch plywood profile thickness. Top to learn more
A well made tool
I bought this because it is too clumsey to cut 4x8 sheets of plywood on a tablesaw unless you have one with the large table extention. I have tried to use a board and other things for straight edges and clamp them to the work with less than perfect results. This tool is made of a heavy aluminum extrustion which will not flex out of shape. The locking arm has three positions, light,medium,and full lock. You slide the other clamp block back and forth to set the grip length. This model has a clamp on both sides so you can clamp it to a workbench and then use the top clamp to hold your work in place. I gave this 4 stars because it does not clamp at an angle. The important thing is when you want to make a straight cut you dont want to fool around aligning and clamping and reclamping. This tool is fast to use and clamps very tight and stays put till you release it.
Top to learn more